Magnum MTP4000S — Inspection Cover And Wear Plate Adjustment
Adjustments · Wear plate clearance
For the Magnum MTP4000S, from the Magnum operator's manual.
Applies to: John Deere PE4024TF281 engine
Procedure
- Loosen the four hand knobs and tighten the four jack screws to open the wear plate clearance.
- Re-tighten the hand knobs.
- Measure the adjustment distance by comparing the before and after gap between the adjustment flange and the volute casing.
Tools required
- jack screws Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Source: Magnum operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.