Magnum MLT4000S — Stowing the Solar Panels
Operation
For the Magnum MLT4000S, from the Magnum operator's manual.
Applies to: Magnum MLT4000S, Generac GN-220 engine
Procedure
- Lower the solar panels to the horizontal position using the Panel Angle switch on the control panel.
- Rotate the rear panel forward until it sets onto the center solar panel.
- Release the two twist lock clamps securing the front panel and rotate it backwards until it sets onto the rear solar panel.
- Latch the two hook clamps to the top (front) panel on both sides of the unit.
Full service-parts list: Magnum MLT4000S →
Source: Magnum operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.