Magnum MLT4000S — Setting the Timer
Operation · Timer Control
For the Magnum MLT4000S, from the Magnum operator's manual.
Applies to: Magnum MLT4000S, Generac GN-220 engine
Procedure
- Press the Timer button once to enter the time slot programs.
- Press Day to alter the day or series of days the time slot will start (On).
- Press the Hour and Min buttons to alter the time of the day.
- Press the Timer button again to enter the Off time for the current time slot.
- Repeat steps 2-3 to set the Off time.
- Press the Timer button to select the next time slot and repeat steps 2-5.
- Press the Clock button to exit from programming the timer.
Full service-parts list: Magnum MLT4000S →
Source: Magnum operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.