Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Magnum›On Mode Generator Operation

Magnum MLT4000S — On Mode Generator Operation

Operation

For the Magnum MLT4000S, from the Magnum operator's manual.

Applies to: Magnum MLT4000S, Generac GN-220 engine

Procedure

  1. Set the Gen Power switch to the Off position.
  2. Check engine oil level.
  3. Check for sufficient fuel supply in the LP tanks.
  4. Open the cylinder valves on both LP tanks.
  5. Set the Gen Power switch to the On position.
  6. Set the Timer Control to the On or Auto mode.

Full service-parts list: Magnum MLT4000S →

Source: Magnum operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Magnum repair guides →