Magnum MLT4000S — Lifting the Trailer
Operation
For the Magnum MLT4000S, from the Magnum operator's manual.
Applies to: Magnum MLT4000S, Generac GN-220 engine
Before you start
- Always remain aware of the position of other people and objects around you as you move the unit.
- Variable fuel levels can shift the center of gravity. Always raise the unit slowly to determine the balance.
Procedure
- Make sure the lifting equipment has sufficient capacity.
- Lower the mast to the lowest position and secure it in the stowed position.
- Configure the solar panels in the stowed position.
- Retract the side outriggers to their stowed position.
- For a hoist, attach slings, chains or hooks directly to the central lift point between the solar panels.
- For a forklift, always use the forklift pockets and approach the unit as perpendicular as possible.
Full service-parts list: Magnum MLT4000S →
Source: Magnum operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.