Home›Repair guides›Magnum›Towing the Unit

Magnum MLT3060 — Towing the Unit

Operation · Trailer

For the Magnum MLT3060, from the Magnum operator's manual.

Applies to: Magnum MLT3060, Kubota D1005-E3BG1-MGM-1 engine

Before you start

  • Maximum highway towing speed 45 mph (72 km/h); off-road 10 mph (16 km/h) or less

Procedure

  1. Raise rear jack and outrigger jacks fully into travel position; slide outriggers into frame.
  2. Use tongue jack to set trailer onto hitch; lock coupling and attach safety chains.
  3. Lubricate leveling jack grease fittings.
  4. Connect trailer wiring to tow vehicle; check stop and signal lights.
  5. Confirm mast cradle locking pin is in place and doors are latched.
  6. Check tire inflation and wheel lug torque per specification.

Full service-parts list: Magnum MLT3060 →, Kubota D1005-E3BG1-MGM-1 engine →

Source: Magnum operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Magnum repair guides →