Magnum MLT3060 — Raising the Mast
Operation
For the Magnum MLT3060, from the Magnum operator's manual.
Applies to: Magnum MLT3060, Kubota D1005-E3BG1-MGM-1 engine
Before you start
- Never raise or lower mast while unit is operating
- Never remove safety pin or release mast lock while mast is up
Procedure
- Set up and level the unit with outriggers extended.
- Remove mast cradle locking pin.
- Check mast cables for wear/damage and check electrical cord for damage.
- Clear area around unit before raising mast to vertical.
- Remove safety pin from mast lock bar; use lower mast winch to raise mast until lock bar snaps into place; secure with safety pin.
- Use upper mast winch to telescope mast to desired height, not beyond the colored mark.
- Loosen mast rotation knob, rotate mast to desired direction, tighten knob.
Full service-parts list: Magnum MLT3060 →, Kubota D1005-E3BG1-MGM-1 engine →
Source: Magnum operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.