Kohler — Spark Plug Replacement
Maintenance · Engine
From a Kohler owner's manual covering: TP 3.0, WP 2.0, WP 3.0. Check it applies to your exact model before use.
Applies to: Kohler TP 3.0, Kohler WP 2.0, Kohler WP 3.0
Procedure
- Clean out spark plug recess
- Remove spark plug
- Check gap using wire feeler gauge
- Adjust gap if needed per specification table
- Install plug into cylinder head
- Torque plug to 20 ft. lb.
Tools required
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Spark plug gap: 0.03 in. (0.76 mm)
- Torque: 20 ft. lb. (27 N·m)
Full service-parts list: Kohler TP 3.0 →, Kohler WP 2.0 →, Kohler WP 3.0 →
Source: Kohler owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.