Home›Repair guides›Kohler›Oil-bath air cleaner cleaning

Kohler — Oil-bath air cleaner cleaning

Maintenance

From a Kohler service manual covering: KD 626-3, KD 626-3 B2 NR, KD 626-3 EPA, KD 626-3 NR. Check it applies to your exact model before use.

Applies to: Kohler KD 626-3, Kohler KD 626/3 engine

Before you start

  • Do not blow the paper filter element with compressed air to clean
  • Check gaskets and replace as necessary
  • The cyclone pre-filter cup must not be filled with oil

Procedure

  1. Thoroughly clean the lower tank and the metal filter element using diesel fuel, then blow compressed air into them.
  2. Clean the upper polyurethane foam filter element by washing it in soapy water.
  3. Dry completely using compressed air.
  4. After cleaning refill the engine oil tank up to the indicated level.

Tools required

Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.

Full service-parts list: Kohler KD 626-3 →

Source: Kohler service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Kohler repair guides →