Home›Repair guides›Kohler›Lifting the Generator Set

Kohler — Lifting the Generator Set

Installation

From a Kohler service manual covering: 10REOZD, 15REOZD, 20REOZD. Check it applies to your exact model before use.

Applies to: Kohler 10REOZD, Kohler 15REOZD, Kohler 20REOZD

Before you start

  • Unbalanced and elevated weight. Do not lift the generator set from the engine or alternator eyes.
  • Never stand under a unit being lifted. Always maintain a safe distance from the unit being lifted.

Procedure

  1. Install proper size rigging at the skid lifting eyes providing a direct pull on the skid lifting eye.
  2. Use a spreader bar to prevent lifting cables from contacting air cleaners, shrouds, or other protruding components.
  3. Select single or double spreader bar and hook method, or single or double spreader bar and skid lifting bar method.
  4. Protect cables, chains, and straps from sharp edges.
  5. After transporting, check radiator alignment and tighten hardware to specified torque.

Full service-parts list: Kohler 10REOZD →, Kohler 15REOZD →, Kohler 20REOZD →

Source: Kohler service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Kohler repair guides →