Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Kohler›Check and Adjust the Spark Plugs

Kohler KG2204 — Check and Adjust the Spark Plugs

Maintenance · Ignition

For the Kohler KG2204, from the Kohler operator's manual.

Applies to: Kohler KG2204 / KG2204T engine

Before you start

  • Label spark plug wires before disconnecting

Procedure

  1. Stop the engine and allow it to cool.
  2. Wipe dirt and oil from area around each spark plug wire.
  3. Disconnect spark plug wires.
  4. Wipe interior of spark plug tubes.
  5. Remove spark plugs with spark plug wrench.
  6. Inspect electrodes; replace if burned, sooted or fouled.
  7. Inspect body for cracks/damage/discoloration; check O-ring.
  8. Measure gap with gap tool and adjust to specification.
  9. Install spark plugs and torque to specification.
  10. Install spark plug wires.

Tools required

Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.

Specs & values

Source: Kohler operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Kohler repair guides →