Kohler — Install Remote Digital Display

Installation

From a Kohler service manual covering: 11-20.5EFKOZD, 175EFOZDJ, 35EFKOZD, 450EFOZCS. Check it applies to your exact model before use.

Applies to: Kohler 175EFOZDJ, Kohler 35EFKOZD, Kohler 450EFOZCS

Procedure

1. Select a dry location in the wheelhouse or bridge.
2. Confirm wiring harness length and mounting depth and overall size.
3. Use Figure 5 and Figure 6 for display mounting dimensions.
4. For single display, connect the 6-pin plug end of the harness to connector B on the display.
5. For multiple displays, connect the 6-pin plug end of the harness to an extension harness or Y-harness as needed.
6. Connect the terminal ends of the harness to terminal strip TB12 inside the junction box.
7. Do not exceed 91.4 m (300 ft.) CAN network length.

Full service-parts list: Kohler 175EFOZDJ →, Kohler 35EFKOZD →, Kohler 450EFOZCS →

Source: Kohler service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Kohler repair guides →