Kohler GEN 5.0 — Spark Plug Service
Maintenance
For the Kohler GEN 5.0, from the Kohler owner's manual.
Applies to: Kohler GEN 5.0
Procedure
- Clean out spark plug recess and remove spark plug
- Check gap using wire feeler gauge and adjust per specification
- Install spark plug into cylinder head
- Torque spark plug to 20 ft. lb. (27 N-m)
Tools required
- wire feeler gauge Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Gap 0.03 in. (0.76 mm)
- Torque 20 ft. lb. (27 N-m)
Source: Kohler owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.