Kohler — Flywheel Removal
Repair & overhaul
From a Kohler service manual covering: KT17, KT17 Series II, KT19 Series II, KT21, Kt19. Check it applies to your exact model before use.
Applies to: Kohler Kt19
Before you start
- Do not use a flywheel puller that grips the outside diameter of the flywheel.
- Do not use any type of bar between the flywheel fins when loosening the flywheel nut.
- Whenever the flywheel retaining screw is removed, the flywheel washer should be replaced.
Procedure
- Use a Kohler strap wrench, part 52 455 03, to hold the flywheel.
- Remove the flywheel retaining screw and washer.
- Use a flywheel puller to remove the flywheel from the crankshaft.
- Inspect flywheel for cracks and keyway for damage; replace if cracked or damaged.
Tools required
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Flywheel retaining screw 40 ft. lbs. (54 Nm)
Full service-parts list: Kohler Kt19 →
Source: Kohler service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.