Kohler — Exerciser Setup (Standard Exerciser)
Operation · controller
From a Kohler service manual — check it applies to your exact model before use.
Applies to: Kohler RDT
Before you start
- Hazardous voltage. Only authorized personnel should open the enclosure.
Procedure
- Press and hold Exercise button approximately 3 seconds until GEN Available LED flashes for unloaded exercise.
- Press and hold Exercise button at least 6 seconds until GEN Available and GEN Position LEDs flash for loaded exercise.
- Exercise runs weekly for 20 minutes at the set day and time.
- Press and hold Exercise button 2 seconds to end the exercise early.
- Press and hold both Exercise and Test buttons at least 6 seconds to reset the exerciser.
Specs & values
- Duration: 20 minutes
- Frequency: weekly
- Type: loaded 3-5 seconds, unloaded 6+ seconds
Source: Kohler service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.