Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Service Procedure

Kohler — Service Procedure

For these Kohler models: RDC2 or DC2 generator set controller, RXT, TP-6808.

Applies to: Kohler Rdc2 Or Dc2 Generator Set Controller, Kohler Rxt, Kohler Tp 6808

Procedure

  1. 1. LED status indicator panels (optional)
  2. 2. Neutral
  3. 3. Neutral bonding jumper
  4. 4. Utility disconnect
  5. 5. Transfer switch
  6. 6. Emergency source connection
  7. 7. Load connection
  8. 8. Ground
  9. 9. Controller interface board (optional combined interface/load

Source: manual:tp6808.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.