Kohler — Change Oil
Maintenance · Engine lubrication system
From a Kohler owner's manual covering: TP 3.0, WP 2.0, WP 3.0. Check it applies to your exact model before use.
Applies to: Kohler TP 3.0, Kohler WP 2.0, Kohler WP 3.0
Procedure
- Change oil while engine is warm
- Clean area around oil fill cap/dipstick and oil drain plug
- Remove oil drain plug and oil fill cap/dipstick; drain oil completely
- Reinstall oil drain plug; torque to 13 ft. lb. (17.6 N-m)
- Fill crankcase with new oil up to point of overflowing filler neck
- Reinstall oil fill cap/dipstick and tighten securely
- Dispose of used oil per local ordinances
Specs & values
- Oil drain plug torque 13 ft. lb. (17.6 N-m)
Full service-parts list: Kohler TP 3.0 →, Kohler WP 2.0 →, Kohler WP 3.0 →
Source: Kohler owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.