Home›Repair guides›Kohler›Automatic Choke Inspection

Kohler — Automatic Choke Inspection

Testing & diagnosis

From a Kohler service manual covering: KT17, KT17 Series II, KT19 Series II, KT21, Kt19. Check it applies to your exact model before use.

Applies to: Kohler Kt19

Procedure

  1. Disconnect the high tension leads from spark plugs so the engine will not start.
  2. Remove the air cleaner cover, element and base.
  3. Push the start switch on the controller to the start position and hold for five seconds.
  4. The choke should fully close and release when the start switch is released.
  5. If the choke does not function properly, see the Service Guide.

Full service-parts list: Kohler Kt19 →

Source: Kohler service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Kohler repair guides →