Home›Repair guides›Kohler›Cooling System Drainage Procedure

Kohler 2000ROZD — Cooling System Drainage Procedure

Maintenance

For the Kohler 2000ROZD, from the Kohler operator's manual.

Applies to: Kohler 2000ROZD

Before you start

  • Dispose of all waste materials (oil, fuel, coolant, filters, and gaskets) in an environmentally safe manner.

Procedure

  1. Deenergize the block heater, if equipped.
  2. Remove the pressure cap to allow the entire system to drain and prevent air pockets from restricting coolant flow.
  3. Open the radiator and/or engine block coolant drain valve(s) and allow the system to drain.
  4. If the radiator has mineral deposits or the coolant contains dirt or grease, flush and clean the system.

Full service-parts list: Kohler 2000ROZD →

Source: Kohler operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Kohler repair guides →