Home›Repair guides›Kohler›Storage Procedure

Kohler 10CC / 10CCOZ-Mobile — Storage Procedure

Maintenance · Generator set

For the Kohler 10CC / 10CCOZ-Mobile, from the Kohler service manual.

Applies to: Kubota V1305BG-2 engine

Procedure

  1. Drain the oil (while hot) from the crankcase, then refill with regular grade oil.
  2. Drain the fuel from the fuel tank to prevent moisture from mixing with the fuel.
  3. Check the engine coolant level and specific gravity.
  4. Disconnect battery (negative lead first) and place in storage.
  5. Seal all openings in the engine with non-absorbent adhesive tape; mask off areas used for electrical contact.
  6. Clean exterior surface of the generator and spread a light film of oil over unpainted metallic surfaces.

Full service-parts list: Kubota V1305BG-2 engine →

Source: Kohler service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Kohler repair guides →