Home›Repair guides›Kohler›Stopping Procedure

Kohler 10CC / 10CCOZ-Mobile — Stopping Procedure

Operation · Controller

For the Kohler 10CC / 10CCOZ-Mobile, from the Kohler service manual.

Applies to: Kubota V1305BG-2 engine

Before you start

  • Do not place Start-Stop/Preheat switch in STOP/PREHEAT position for more than 20 seconds or damage may occur to the preheat feature.

Procedure

  1. Whenever possible, run the set at low or no load for a few minutes prior to shutdown.
  2. Push the switch into the STOP/PREHEAT position.
  3. If generator set shuts down automatically, identify and correct the problem before attempting to restart.

Full service-parts list: Kubota V1305BG-2 engine →

Source: Kohler service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Kohler repair guides →