Kohler 10CC / 10CCOZ-Mobile — Oil Filter Replacement
Maintenance
For the Kohler 10CC / 10CCOZ-Mobile, from the Kohler service manual.
Applies to: Kubota V1305BG-2 engine
Parts for this job
- W21ESO1600 Oil filter Amazon eBay $5.45
Part numbers from the service-parts list for Kubota V1305BG-2 engine. Verify against your serial number before ordering; some links are affiliate links.
Procedure
- With oil system drained, loosen oil filter by turning counterclockwise with a filter wrench.
- Remove and discard filter; use rags to clean up spilled oil.
- Clean contact surface on oil filter adapter.
- Lightly lubricate the gasket surface of the new filter with fresh engine oil.
- Thread oil filter to adapter until gasket makes contact, then hand-tighten an additional one-half turn.
- Replace engine oil per Oil Change procedure.
- Start set and check for oil leaks; stop set and check oil level.
Tools required
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Replace first time after 50 hours or 1 month, then every 100 hours or 3 months
Full service-parts list: Kubota V1305BG-2 engine →
Source: Kohler service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.