Isuzu 4LE2 — Oil Filter (Cartridge / Spin-On Type)
Maintenance
For the Isuzu 4LE2, from the Isuzu service manual.
Applies to: Isuzu 4LE2, Isuzu 4LE2 engine
Parts for this job
- X13201002 Oil filter — Isuzu 4LE2 Amazon eBay $23.95 PartsGeek $11.97 NAPA $14.63
- X13201002 Oil filter — Isuzu 4LE2 engine Amazon eBay $23.95 PartsGeek $11.97 NAPA $14.63
Part numbers from the service-parts lists for Isuzu 4LE2, Isuzu 4LE2 engine. Verify against your serial number before ordering; some links are affiliate links.
Procedure
- Loosen used oil filter by turning counterclockwise with filter wrench; discard.
- Wipe oil filter mounting face with clean rag.
- Lightly oil the O-ring.
- Turn in new oil filter until sealing face fits against O-ring.
- Use filter wrench to turn an additional 3/4 of a turn or one turn.
- Check engine oil level and replenish to specified level.
- Start engine and check for oil leakage from oil filter.
Tools required
- Filter wrench Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Tightening torque (reference): 12 to 16 N·m (1.2 – 1.6 kgf·m)
Full service-parts list: Isuzu 4LE2 →, Isuzu 4LE2 engine →
Source: Isuzu service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.