International — Spin-on type oil filter service
Maintenance
From a International owner's manual covering: C-152, C-196, C-304, C-345, C-392, C-446, C-537, C-605. Check it applies to your exact model before use.
Applies to: International C 549 engine
Before you start
- Do not over tighten the filter
Procedure
- Remove oil filter assembly by turning counterclockwise with hands or suitable tool. Clean filter mounting pad.
- Coat gasket on new filter with a film of grease.
- Place new filter on center tube (threaded); hand tighten 1/2 to 3/4 of a turn after gasket first contacts base.
- Do not over tighten.
- Refill engine crankcase to proper oil level with recommended type and grade of oil.
- Start engine and run at least five minutes to warm oil and check for leaks.
- Recheck and add oil to bring level between the Add and Full marks on the dipstick.
Source: International owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.