International — Replaceable element type oil filter service

Maintenance

From a International owner's manual covering: C-152, C-196, C-304, C-345, C-392, C-446, C-537, C-605. Check it applies to your exact model before use.

Applies to: International C 549 engine

Procedure

1. Remove drain plug in bottom of filter and drain oil. Reinstall drain plug.
2. Loosen filter body retaining bolt and remove filter body and element.
3. Check condition of filter body to base gasket. Replace if necessary.
4. Wash filter body in cleaning fluid, making sure all sediment is removed inside.
5. Position new filter element with large hole end toward filter base; seat element on pilot on base.
6. Install filter body and bolt with spring assembly to filter; be sure body seats on gasket seal in base.
7. Tighten retaining bolt to 41-47 N.m (30-35 ft. lbs.) torque.

Source: International owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More International repair guides →