Home›Repair guides›Generac›Spark Arrestor Muffler Service

Generac — Spark Arrestor Muffler Service

Maintenance

From a Generac owner's manual covering: IMPACT 36, IMPACT-34 plus, Impact-36 plus. Check it applies to your exact model before use.

Applies to: Generac Impact-36 plus, Generac GN-220 engine

Before you start

  • Required by law in California (Section 4442 California Public Resources Code).

Procedure

  1. Remove exhaust tubing connected to the muffler.
  2. Remove screw attaching the arrestor to the muffler.
  3. Inspect and clean the spark arrestor every 100 hours.
  4. Replace cone-shaped spark arrestor if torn, perforated or otherwise damaged.

Specs & values

  • Inspect and clean every 100 hours of operation

Full service-parts list: Generac Impact-36 plus →

Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Generac repair guides →