Home›Repair guides›Generac›Replacing the Engine Air Filter

Generac — Replacing the Engine Air Filter

Maintenance · Air Intake

From a Generac owner's manual — check it applies to your exact model before use.

Applies to: Generac 15 kW EcoGen, Generac G-Force 1000 Series engine

Parts for this job

Part numbers from the service-parts list for Generac 15 kW EcoGen. Verify against your serial number before ordering; some links are affiliate links.

Procedure

  1. Lift lid and remove front panel with generator shut down
  2. Remove cover clip and air cleaner cover
  3. Pull out old air filter and discard
  4. Thoroughly clean air cleaner enclosure of dust/debris
  5. Install new air filter
  6. Install air cleaner cover and cover clip

Full service-parts list: Generac 15 kW EcoGen →

Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Generac repair guides →