Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Generac›Replace Engine Air Filter

Generac — Replace Engine Air Filter

Maintenance · Engine Air System

From a Generac owner's manual — check it applies to your exact model before use.

Applies to: Generac 15 kW EcoGen, Generac GT-999 engine

Parts for this job

Part numbers from the service-parts list for Generac 15 kW EcoGen. Verify against your serial number before ordering; some links are affiliate links.

Procedure

  1. Remove unit from service.
  2. Disengage cover clip and remove air cleaner cover.
  3. Remove air filter and discard.
  4. Thoroughly clean air cleaner cover and housing of dust and dirt.
  5. Install new air filter.
  6. Install air cleaner cover and engage cover clip.

Specs & values

  • Filter replacement interval: 1000 hours or 4 years

Full service-parts list: Generac 15 kW EcoGen →

Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Generac repair guides →