Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Generac›Removing Battery

Generac — Removing Battery

Maintenance

From a Generac owner's manual covering: XG03245, XG04045, XG04845. Check it applies to your exact model before use.

Applies to: Generac Model, Generac Number, Generac XG03245, Generac XG04045, Generac XG04845

Before you start

  • Electrical shock. Disconnect battery ground terminal before working on battery or battery wires. Failure to do so could result in death or serious injury. (W000164)

Procedure

  1. Remove negative battery cable from negative terminal.
  2. Remove positive battery cable from positive terminal.
  3. Install rubber protective cover over positive terminal.
  4. Release buckle on nylon strap securing battery.
  5. Grasp battery strap and lift battery from tray.
  6. Remove rubber protective cover from positive terminal.

Full service-parts list: Generac Model →, Generac Number →, Generac XG03245 →, Generac XG04045 →, Generac XG04845 →

Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Generac repair guides →