Generac QuietPact 40 — Stopping the Generator

Operation

For the Generac QuietPact 40, from the Generac owner's manual.

Applies to: Generac QuietPact 40, Generac GN-220 engine

Procedure

1. Turn OFF all electrical loads using the means provided.
2. Let generator run at no-load for a few minutes to stabilize internal temperatures.
3. Place the Start/Stop switch in its STOP position.

Full service-parts list: Generac QuietPact 40 →

Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Generac repair guides →