Generac QuietPact 40 LP — Out of Service Procedure – Removal From Service
Maintenance · Generator
For the Generac QuietPact 40 LP, from the Generac owner's manual.
Applies to: Generac QuietPact 40 LP, Generac GN-220 engine
Before you start
- Never store the battery on any concrete or earthen floor.
Procedure
- Start the engine and let it warm up.
- Close the fuel shutoff valve in the fuel supply line and allow the unit to shut down.
- While the engine is still warm, drain the oil completely. Refill the crankcase with SAE 10W-30 oil having API classification For Service SF.
- Attach a tag to the engine indicating the viscosity and classification of the oil in the crankcase.
- Remove the spark plug and pour two or three tablespoons of clean, fresh engine oil into the spark plug threaded openings. Reinstall and tighten the spark plug.
- Remove the battery and store it in a cool, dry room on a wooden board. Never store on concrete or earthen floor.
- Clean and wipe the entire generator.
Specs & values
- Refill with SAE 10W-30 Amazon eBay $54.99 API SF oil
Full service-parts list: Generac QuietPact 40 LP →
Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.