Home›Repair guides›Generac›Cleaning or Replacing the Paper Filter

Generac QuietPact 40 LP — Cleaning or Replacing the Paper Filter

Maintenance · Engine Air Cleaner

For the Generac QuietPact 40 LP, from the Generac owner's manual.

Applies to: Generac QuietPact 40 LP, Generac GN-220 engine

Procedure

  1. Remove the paper filter.
  2. Clean the air filter by tapping it gently on a solid surface. If too dirty, replace it with a new one.
  3. Clean the air cleaner cover then reassemble following steps 7-9 in Section 3.3.1.

Specs & values

  • Once each year or every 100 hours of operation, whichever comes first
  • New replacement filter must be flame retardant

Full service-parts list: Generac QuietPact 40 LP →

Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Generac repair guides →