Generac QuietPact 40 LP — Battery Cable Connections
Installation
For the Generac QuietPact 40 LP, from the Generac owner's manual.
Applies to: Generac QuietPact 40 LP, Generac GN-220 engine
Before you start
- Check to be sure the battery cable boot for the starter cable has been installed.
- Damage will result if the battery connections are made in reverse.
Procedure
- Connect the battery cable from the POSITIVE post or terminal to the lug on the starter contactor.
- Connect the battery cable from the NEGATIVE post to the frame ground connection.
- Connect cables so the connectors are clean and tight.
Full service-parts list: Generac QuietPact 40 LP →
Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.