Generac QT 1.6L 20kW — Retransfer and Shutdown (Manual Transfer Switch)
Operation · Generator and transfer switch
For the Generac QT 1.6L 20kW, from the Generac owner's manual.
Applies to: Generac QT 1.6L 20kW, Generac In Line engine
Procedure
- Set the standby generator's main line circuit breaker to its OFF (or OPEN) position.
- Manually move the transfer switch handle to its UTILITY (NORMAL) position.
- Turn ON the utility power supply to the transfer switch.
- Let the generator run at no-load for a few minutes to stabilize internal temperatures.
- Shut down the generator.
Full service-parts list: Generac QT 1.6L 20kW →
Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.