Generac PRIMEPACT 50 / PrimePact 50 LP — Removal from Service (Storage)
Maintenance · Generator
For the Generac PRIMEPACT 50 / PrimePact 50 LP, from the Generac owner's manual.
Applies to: Generac GN-410 engine
Before you start
- Never store the battery on any concrete or earthen floor.
Procedure
- Start the engine and let it warm up.
- Close the fuel shutoff valve in the fuel supply line and allow the unit to shut down.
- While the engine is warm, drain the oil completely and refill crankcase with SAE 10W-30 API SF oil.
- Attach a tag to the engine indicating the viscosity and classification of the oil.
- Remove spark plug, pour two or three tablespoons of clean engine oil into opening, reinstall plug.
- Remove the battery and store it in a cool, dry room on a wooden board.
- Clean and wipe the entire generator.
Specs & values
- Out of service longer than 30 days
Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.