Generac PRIMEPACT 50 / PrimePact 50 LP — Cleaning or Replacing the Paper Filter
Maintenance · Engine air cleaner
For the Generac PRIMEPACT 50 / PrimePact 50 LP, from the Generac owner's manual.
Applies to: Generac GN-410 engine
Procedure
- Remove the cover, foam precleaner and paper filter; service precleaner if necessary.
- Remove the paper filter.
- Clean by tapping it gently on a solid surface.
- If too dirty, replace with a new flame retardant filter.
- Reassemble following steps 7-9 of Cleaning the Foam Precleaner.
Specs & values
- Once each year or every 100 hours of operation, whichever comes first
Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.