Generac PRIMEPACT 50 — Cleaning or Replacing the Paper Filter
Maintenance · Engine air cleaner paper filter
For the Generac PRIMEPACT 50, from the Generac owner's manual.
Applies to: Generac GN-410 engine
Procedure
- Follow steps 1-3 of Cleaning the Foam Precleaner; service the foam precleaner if necessary.
- Remove the paper filter.
- Clean the air filter by tapping it gently on a solid surface; replace it if too dirty.
- Clean the air cleaner cover then reassemble following steps 7-9 of Cleaning the Foam Precleaner.
Tools required
- Clean cloth Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Once each year or every 100 hours of operation (whichever comes first)
- New replacement filter must be flame retardant
Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.