Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Generac›Generator Activation

Generac PowerPact 5.6 kVA 50 Hz — Generator Activation

Operation · Controller

For the Generac PowerPact 5.6 kVA 50 Hz, from the Generac service manual.

Applies to: Generac PowerPact 5.6 kVA 50 Hz

Procedure

  1. Locate and record the generator serial number.
  2. Contact Generac to obtain your activation code.
  3. Hold the OFF button for 3 seconds; all LEDs flash twice.
  4. Enter the 6-press code using AUTO, OFF and SET EXERCISE within 20 seconds.
  5. If incorrect, AUTO/OFF/MANUAL flash 3 times; return to Step 3.
  6. If correct, all LEDs scroll bottom to top 5 times.

Full service-parts list: Generac PowerPact 5.6 kVA 50 Hz →

Source: Generac service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Generac repair guides →