Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Generac›Before Starting

Generac PowerPact 5.6 kVA 50 Hz — Before Starting

Operation · Generator

For the Generac PowerPact 5.6 kVA 50 Hz, from the Generac service manual.

Applies to: Generac PowerPact 5.6 kVA 50 Hz

Before you start

  • Do not fill oil above the FULL mark.

Procedure

  1. Ensure the generator is OFF.
  2. Set the generator main circuit breaker to OFF (or OPEN).
  3. Turn off all breakers that will be powered by the generator.
  4. Check crankcase oil level; fill to dipstick FULL mark.
  5. Check fuel supply; purge and leak test lines; open all fuel shutoff valves.

Full service-parts list: Generac PowerPact 5.6 kVA 50 Hz →

Source: Generac service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Generac repair guides →