Home›Repair guides›Generac›Out of Service Protection / Storage Preparation

Generac — Out of Service Protection / Storage Preparation

Maintenance · generator

From a Generac owner's manual covering: IMPACT 36, IMPACT-34 plus, Impact-36 plus. Check it applies to your exact model before use.

Applies to: Generac Impact-36 plus, Generac GN-220 engine

Before you start

  • Never store battery on concrete or earthen floor

Procedure

  1. Start engine and let it warm up
  2. While warm, drain oil completely and refill crankcase with recommended oil
  3. Attach tag indicating oil viscosity/classification
  4. Remove spark plug, add about 1/2 ounce (15ml) clean engine oil into spark plug opening, crank engine several times, reinstall plug
  5. Remove battery and store in cool dry room on wooden board
  6. Clean and wipe entire generator

Full service-parts list: Generac Impact-36 plus →

Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Generac repair guides →