Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Generac›Lowering the Trailer Tongue

Generac MMG50ITM — Lowering the Trailer Tongue

Installation

For the Generac MMG50ITM, from the Generac operator's manual.

Applies to: Generac MMG50ITM, Isuzu 4LE2XAGV01 engine

Before you start

  • If the jack was used to support the unit, move the jack back to the tongue location before towing.

Procedure

  1. Elevate the unit using a hoist or forklift, or use the front jack on the trailer tongue.
  2. Remove the hitch pin (1) securing the tongue to the trailer frame, then remove hitch pin (2) from the trailer frame.
  3. Lower the trailer tongue and reinstall the hitch pins at the locations shown (3).

Tools required

Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.

Full service-parts list: Generac MMG50ITM →, Isuzu 4LE2XAGV01 engine →

Source: Generac operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Generac repair guides →