Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Generac›Shutting Down the Unit

Generac MLT3060K / MLT3060M — Shutting Down the Unit

Operation · Engine / breakers

For the Generac MLT3060K / MLT3060M, from the Generac owner's manual.

Applies to: Generac MLT3060K, Generac MLT3060M, Mitsubishi L3E engine, Kubota D1005 engine

Before you start

  • Allow lamps to cool 10-15 minutes before handling or lowering mast.

Procedure

  1. Remove all loads from the outlets.
  2. Switch individual circuit breakers for each light OFF (O).
  3. Switch the main circuit breaker OFF (O).
  4. Turn the engine start switch to STOP.

Full service-parts list: Generac MLT3060K →, Generac MLT3060M →, Kubota D1005 engine →

Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Generac repair guides →