Generac — Lifting the Unit
Operation · Central lifting eye and forklift pockets
From a Generac owner's manual covering: MLT5150, MLT5200, MLT5200ICAN. Check it applies to your exact model before use.
Applies to: Generac MLT, Mitsubishi S4L2-W461ML engine, Isuzu 4LE1NYGV-03 / 4LE1NYGV-03E engine, Isuzu D1105-E3BG engine
Before you start
- Crushing hazard. Verify unit is properly secured and on level ground. An unsecured unit can suddenly roll or move, causing death or serious injury.
Procedure
- Verify the equipment being used to lift the unit is in good condition and has sufficient capacity.
- Close and lock all hoods and doors and stow the lights as shown.
- Verify the cradle locking pin is in place.
- When lifting the light tower and trailer, attach any slings, chains or hooks directly to the central lifting eye.
- Always remain aware of people and objects around the unit while preparing, maneuvering, and lifting the unit.
- Use the upper or lower forklift pockets with care, approaching as perpendicular as possible to avoid damage.
Specs & values
- For approximate weights, refer to Specifications
Full service-parts list: Generac MLT →, Mitsubishi S4L2-W461ML engine →, Isuzu 4LE1NYGV-03 / 4LE1NYGV-03E engine →
Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.