Generac Impact-36G / NP-36G — Change Oil Filter

Maintenance · Engine oil filter

For the Generac Impact-36G / NP-36G, from the Generac owner's manual.

Applies to: Generac GN-220 engine

Procedure

1. Turn oil filter counterclockwise to remove.
2. Coat gasket of new filter with engine oil.
3. Turn new filter clockwise until gasket contacts filter adapter lightly.
4. Tighten an additional 3/4 to one turn by hand.
5. Run engine and check for leaks.
6. Check oil level and fill to FULL mark.

Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Generac repair guides →