Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Generac›Starting Pull Start Engines

Generac GP3300 — Starting Pull Start Engines

Operation

For the Generac GP3300, from the Generac owner's manual.

Applies to: Generac GP3300

Before you start

  • Recoil Hazard. Recoil could retract unexpectedly. Kickback could result in death or serious injury.

Procedure

  1. Rotate the PowerDial to CHOKE (3).
  2. Switch Economy switch to OFF.
  3. Firmly grasp recoil handle and pull slowly until increased resistance is felt. Pull rapidly up and away.
  4. When engine starts, rotate Off/Run/Choke dial to RUN (2).

Full service-parts list: Generac GP3300 →

Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Generac repair guides →