Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›RECONNECTION FOR DUAL VOLTAGE OUTPUT (CONTINUED):

Generac — RECONNECTION FOR DUAL VOLTAGE OUTPUT (CONTINUED):

For these Generac models: NP45G, NP52G, NP55G, NP65G, NP66G, NP72G.

Applies to: Generac Np45G, Generac Np52G, Generac Np55G, Generac Np65G, Generac Np66G, Generac Np72G

Procedure

  1. 3. Set aside the red (T1) and the black (T3) wires for later use.
  2. 4. Disconnect stator leads 22 and 44 from the grounding terminal (GT).
  3. 5. Disconnect one of the two white (T2) leads that attach to the grounding terminal (GT).
  4. 6. Install new breakers or, if existing breakers are both rated 30 amps, modify them by installing a rod or

Source: manual:Y78800.PDF. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.