Generac 6.8L V-10 / V-10 6.8L — Battery Maintenance
Maintenance
For the Generac 6.8L V-10 / V-10 6.8L, from the Generac owner's manual.
Applies to: Generac V-10 6.8L, Generac V-type engine, Generac V-type 6.8L engine
Before you start
- Storage batteries give off explosive hydrogen gas.
- Battery electrolyte fluid is an extremely caustic sulfuric acid solution.
- Do not use any jumper cables or booster battery to crank and start the generator engine.
Procedure
- Inspect the battery posts and cables for tightness and corrosion. Tighten and clean as necessary.
- Check the battery fluid level of unsealed batteries and fill with DISTILLED WATER ONLY.
- Have the state of charge and condition checked with an automotive-type battery hydrometer.
Tools required
- automotive-type battery hydrometer Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Full service-parts list: Generac V-10 6.8L →
Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.