Home›Repair guides›Generac›Charging a Battery

Generac 4700 / QuietPact 40 — Charging a Battery

Maintenance

For the Generac 4700 / QuietPact 40, from the Generac service manual.

Applies to: Generac 4700, Generac QuietPact 40, Generac GH-220 engine

Before you start

  • Battery fluid is an extremely corrosive sulfuric acid solution that can cause severe burns.
  • Do not smoke or break a live circuit near the top of the battery; sparking could cause an explosion.

Procedure

  1. Use an automotive type battery charger to recharge a battery.
  2. Charge only in a well ventilated area; explosive gas mixture forms in each cell.
  3. Do not smoke or break a live circuit near the top of the battery.
  4. Avoid spillage of battery fluid; if spillage occurs, flush the affected area with clear water immediately.
  5. Wear eye protection when handling a battery.

Tools required

  • automotive type battery charger Amazon

Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.

Specs & values

  • Fully charged specific gravity 1.260

Full service-parts list: Generac 4700 →, Generac QuietPact 40 →

Source: Generac service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Generac repair guides →