Home›Repair guides›Generac›Check Engine Oil Level

Generac 005324-0 / 005325-0 — Check Engine Oil Level

Maintenance · Engine crankcase oil dipstick

For the Generac 005324-0 / 005325-0, from the Generac owner's manual.

Applies to: Generac In Line engine

Before you start

  • DO NOT FILL ABOVE THE 'FULL' MARK.

Procedure

  1. Remove oil dipstick and wipe dry with a clean, lint-free cloth.
  2. Install oil dipstick, then remove again.
  3. Oil should be between FULL and ADD marks.
  4. If oil level is below the ADD mark, remove oil fill cap and add recommended oil to bring level up to the FULL mark.

Tools required

Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.

Specs & values

  • Oil should be between FULL and ADD marks

Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Generac repair guides →