Generac 005213-0 — Battery Maintenance
Maintenance
For the Generac 005213-0, from the Generac owner's manual.
Applies to: Generac In Line engine
Before you start
- DO NOT USE TAP WATER IN BATTERIES.
- Storage batteries give off explosive hydrogen gas; properly ventilate the area and keep sparks and flames away.
Procedure
- Inspect the battery posts and cables for tightness and corrosion. Tighten and clean as necessary.
- Check the battery fluid level of unsealed batteries and, if necessary, fill with DISTILLED WATER ONLY.
- Have the state of charge and condition checked with an automotive-type battery hydrometer.
Tools required
- Automotive-type battery hydrometer Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- BCI Group 26, 525 CCA @ 0 deg. F
Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.